Type of Harmonica

  • The type of harmonica that these lessons are intended for is, a ten hole "diatonic harmonica". It is often referred to as a Blues Harp by players. It's the one that all the cool Bluesy stuff is played on. Blues Harps come in about 12 different keys, depending on the manufacturer or brand name. For the purposes of learning, it is better to begin with a Key "C" harmonica. This is because all beginners instructional material for harmonica tends to be in the key of "C"
  • Some popular brands of Harmonica are ; Lee Oscar, Hohner, Suzuki, Bushman.
  • Practically all diatonic harmonicas have numbers over the holes, the lowest pitch note being number 1

harmonica


How to hold your Harmonica

harmonica1
Hold the harp between the index finger and thumb of your left hand and use your right hand to create a sealed sound box at the back of the harp.

harmonica2
With your hands closed tight around the harp you will notice that this dulls the sound coming from the harp or that the harp can't be played as loud.

harmonica3
Now allow an opening at the back of your hands. This opening will let the sound to escape. When you have this opening the right size, you will notice that your hands act like an old style megaphone to amplify the sound of the harp.

harmonica4
These next two pictures demonstrate the Wah-wah effect created by opening and closing the hands. In this picture the right hand is closed against the back of the harmonica.

harmonica5
In this picture the right hand is opened away from the harmonica.

Explanation of Tablature

For the purposes of learning, and if you are not familiar with reading sheet music we are going to use Harmonica Tab or tablature to describe the notes or holes we are playing on the harmonica. Over time there have been many ways of tabbing Harmonica, most involving pictures of arrows to depict inhails, exhails and bent notes. However a convention has developed over time, using pluses (+) Minuses (-) and commas ("), and its a method that allowa tab to the typed easily. Below is a brief explanation.

+4 means, blow into hole 4 on your Harmonica

-6 means, inhale on hole 6.

-4' means, a half tone bend on 4 draw.

-2" means, full tone bend on 2 draw.

-3"' means, bend hole 3 down one and a half steps.

+8' means, blow bend hole 8 down one semi tone.


What Notes are on a Key "C" Harmonica

There are two notes in each hole, a blow note and a draw note. Study the diagrams below and you will notice that some notes are missing.

harmonica notes

notes

"F" and "A" on the lower octave, and "B" on the upper octave are missing. These notes can be played by bending the higher pitched note in that hole down in pitch, but this is an advanced technique so don't worry about it for now.


How to Play a Single Note

Put your mouth over the front of the harmonica covering holes 2 to 4. Then put your tongue on the separator bar between holes 2 and 3. This should block holes 2 and 3, leaving hole 4 open. Blow or inhale on hole number 4. This method for playing a single note is called Tongue Blocking

tongue blocking

Another popular method is called the Pucker or Lip Blocking method, and this is achieved without using the tongue. You just purse your lips, or pucker up.

lip blocking

You should get a clear single note, no double notes. Practice both methods until you get clear single notes every time. Personally I favor the Tongue Blocking Method while playing and feel that it facilitates a broader range of effects. You will find that different people favor different methods and they may even denigrate other methods. Try to learn both methods but you will probably eventually favor one. With enough practice you will be able to play well which ever method you favor.

Practice the "C" scale using both Tongue Blocking and Lip Blockingc scale

Notice the change in direction at holes 6 and 7.


Some Basic Music Theory

The C major scale goes like this:

C  D  E  F  G  A  B  C

This means the same as:

do, re, me, fa, sol, la, te, do.

And it looks like this on sheet music score:

c scale

There are also a lot of half notes or semi tones in between these notes. These half notes or semi tones are also known as sharps and flats.

C# = C sharp

Bb = B flat

C#, is a note half a tone above C and Bb, is a note half a tone below B. So from this we can figure out that, C# is the same note as Db

The full range of notes and semi tones on a c scale are:

C  C#  D  D#  E  F  F#  G  G#  A  A#  B  C

This can also be written as:

C  Db  D  Eb  E  F  Gb  G  Ab  A  Bb  B  C

And this full range of notes and semi tones looks like this on sheet music score:

scale

Notice that there is only a semi tone between E and F, same as for B and C. And now look at the G major scale.

G  A  B  C  D  E  F#  G

And the A major scale:

A  B  C#  D  E  F#  G#  A

Study these scales and compare them with the full possible range of notes and semi tones. There is a pattern or sequence for major scales, the notes go up in steps.

whole-step, whole-step, half-step, whole-step, whole-step, whole-step, half-step

See if you can write out some other major scales yourself.

For some more advanced music theory check out MusicTheory.net