Do you want an email notification of replies?
Disable Emoticons for this post?
Disable Tiny Code for this post?
Previous 5 of 7 Posts
re: Bendometer Aug-20-05 5:28pmKennyp, a Bendo Meter is a software one can use (provided you have a microphone) that will show you on you monitor if you are bending the notes and how far you are bending them.
re: Bendometer Aug-20-05 5:48amI'm sorry but i'm new to both this forum and harping. What is a bendometer?
[ Edited: Aug-19-05 11:50pm by kennyp ][/edit]
re: Bendometer Aug-18-05 2:08pmBy a half bend you do literally mean a half bend right? Not that you're just bending it a little bit?
If you're using Bendometer and have the layout set to "Bends" it should only show the half step as you can't bend that note any further.
ie. For a C harp there should be a box below hole four with a D in it, and a box below that with a C# in it.
If you mean you can bend down to C# then great, that's all you need to do. If you mean that the blue box which shows how far you're bending only gets half way then keep practicing!
re: Bendometer Aug-15-05 7:00pmNo problem my friend. Glade to be able to help.